Linksys Wifi Extender Setup Instruction
There are two ways for Linksys WiFi Extender Setup. The first one is the manual method and the other one is WPS method.
You can opt for either of them as per your comfort:
Linksys Wifi Extender Setup With Ethernet ( Without WPS)
Go through these steps for manual ‘Linksys Wifi Extender Setup with ethernet cable ‘ method:
1. Place your desktop and range extender in the same room.
2. Then, via the ethernet cable, connect your desktop with the extender.
3. Next, power on the extender and desktop (Laptop).
4. Now, connect it to the Linksys extender setup-xxx network.
5. Launch any web browser.
6. Now go to the login page using this ip address – 192.168. 1.1.
7. Thereafter, a page will open asking you for your login details. Insert your credentials over there.
8. Now, as soon as the basic extender.linksys.setup screen gets visible, type the SSID of the existing router in the given fields.
9. Then, choose the manual option and restart your extender after turning off the power for a few minutes.
After following all these Linksys Wifi Extender Setup Without WPS Method correctly, your extender’s installation process will get completed and you will be able to use its services.
How to Setup Linksys WiFi Extender With WPS (Without Ethernet Cable)
Well, this Linksys WiFi Extender setup with the WPS method itself, consists of two ways for setting up the WiFi extender. The first way is by using the physical WPS button on the extender, while the other one is that you need to login to web-based “extender.linksys.setup” page and select either of the three available options.
(a) Connect Linksys Wifi Extender- Using the physical WPS button:
Follow the below-written steps to setup through this way:
1. Power on your WiFi extender.
2. Press & hold the WPS button on extender.
3. Look for the WPS LED on the device.
4. If the led light turns on, then it means that the range extender is connecting with the router.
5. After a couple of minutes, check if the led light’s color has been changed to green.
6. If it shows green, then it means that the setup is successfully completed.
Note: In case, if you are doing this on a dual-band Linksys extender, then apply these steps one more time.
(b) To Setup Linksys Wifi Extender – Using the web-based WPS button :
In this way, you get three options to do so, namely: WPS button, WPS Pin, and router’s pin.
1. WPS Button: Setup Linksys Extender
• Firstly, log in to the Linksys wireless range extender.
• Click on the wireless option and then on the WPS button.
• Now, press the WPS button present on the extender.
• Click on “enable”. (Located next to the WPS button).
2. WPS Pin : Extender Linksys Setup
If your device has a WPS pin, then you can opt to go through this :
• Open the login page i.e. the extender setup web-based page on your browser.
• Now, on the second field, write down that pin. The process will get completed.
3. Router’s pin : To Setup Linksys Wifi Extender
• If your device asks for the router’s pin, then open the Linksys Extender setup page first.
• Then, in the third field, type the router pin.
• If the WPS light on your extender remains lit, then it would mean that the process of Linksys Wifi Range Extender Setup Without Ethernet Cable is complete.
How to Update Firmware of the Extender:
1. Open up the web-based setup page.
2. Under the administration menu, click on “Firmware Upgrade”.
3. Click on choose file.
4. Select the firmware file you downloaded earlier (you can download them from the Linksys website).
5. Click on open.
6. Finally, click on “start upgrade”.
Setup Linksys Range Extender as an access point mode
Your Linksys Wi-Fi range extender can also be setup to the access point mode. This mode is used because it increases the WiFi speed and removes the chances of bad performance.
To Configure the ‘Linksys Range Extender Setup’ as access point, follow these steps –
Required essentials before setting up :
• A proper internet connection.
• Name of WIFI network and its password.
• An ethernet cable.
After getting all the prerequisites, follow these steps :
1. Power on your Linksys range extender.
2. Now, take your ethernet cable and plug one end of the cable to the extender and another one to the router.
3. Now, connect your computer to the internet.
4. Launch any web browser.
5. Open up the Linksys extender setup page.
6. Now, on the page, look for the wired range extender (Access point) option and select it.
7. Click on next.
8. Then, set up an extended WiFi network that you will get after the Linksys extender setup.
9. Now hit the “next” button.
10. For your range extender, create an admin WiFi network password and click on save.
With this, the ‘Linksys Extender Setup’ process is complete. Now, you can connect to the extender network and avail the service.
How to Check WiFi Connectivity after Setting up the Extender?
WiFi connectivity can be checked using the “Ping command”. Follow the steps written below to check the connectivity :
1. Check if the Linksys extender setup – xxx network is being shown in the available networks list.
2. Open the command prompt (Open ‘Run’ from windows search bar and type in ‘CMD’ in it and press ‘Enter’).
3. Type the IP address of your Linksys range extender and hit the “enter” key.
4. If it shows data transmission, then it would mean that the setup process of Linksys WiFi extender is complete.
5. In case, if it shows “no data transmission” or “disconnected”, then there could be a chance that the firmware of your device is older. In that scenario, update it to the latest version.
With the above-mentioned steps, you can easily check if the setup process is completed successfully or not
How to change the Linksys Smart Wifi Setup password?:
Follow these steps if you want to change the password:
- Open any web browser and enter the “Default ip address – 192.168.1.1” in the address bar.
- Linksys extender login page will now be visible on your screen.
- Enter your default password and click on login.
- Then, go to settings and then look for the “administration” option.
- Now go the the “management.”
- Enter the new password for your Linksys extender.
- Re-enter your password to make confirmation.
- Click on the Save button. Your changes will now be applicable.
How to Access 'Linksys Extender after Setup'
In case, you ever want to change some settings or tweak anything such as name or password, then go through these steps to reach the extender’s setting portal:
- Connect your desktop to the extender’s network by ethernet cable or wirelessly.
- Launch any web browser.
- In the URL box, type: 192.168. 1.1. and then hit “enter”.
- Now enter your login credentials on the prompted box.
- After typing, click on “log in”.
- Now the main screen page will be visible to you and you will be able to change any setting at your convenience.
The Required Prerequisites of 'Linksys Extender Setup' are:
• Ensure that the extender receives proper electric supply.
• Have the existing router’s wireless settings i.e. SSID, password, and the wireless channel written somewhere.
• Make sure that you factory reset the WiFi range extender.
• Ensure you have a proper working internet connection.
These were some of the basic prerequisites before installing the Linksys WiFi extender. After you get all these, go through the following steps above of ‘Linksys Extender Setup’ to proceed further.
Linksys Extender FAQs :
Conclusion:
These were the easy-to-go-through steps ‘ Linksys Wifi Extender Setup‘ and also check its connectivity & change the settings. We hope these worked for you.
Comments
Post a Comment